This RS4 is a 2007 model finished in a Daytona Grey Pearl Effect. It has black leather and is one of approximately 613 sedan B7 RS4 that were produced for the US market between 2007-2008.
It is equipped with a 4.2L quad-cam V8 sending power to all four wheels through a six-speed manual transmission and a Quattro all-wheel drive system.
This RS4 has resided in Southern California since its release from the manufacturer. More than $40K in work has been carried out, including adding a European-spec RS4 steering wheel, power coating the wheels and brake calipers along fitting new exterior and interior trim.
Mechanical servicing involved overhauling the brakes and replacing suspension bushings as well as installing a coolant expansion tank, ignition coils, spark plugs, fuel pumps, and injectors.
This RS4 includes the owner’s manual, factory keys, service records, and a clean CARFAX report.
This RS4 features a revised front bumper with a larger intake compared to a standard B7 S4, as well as fender flares that accommodate a wider track.
To maintain the integrity of the Daytona Grey Pearl finish, it underwent paint correction and was treated with three layers of ceramic coating.
The custom-built headlights were refurbished adding STI lenses with the RS logo etching and the chrome reflectors were also converted to grey.
It also features a new front center grill with a deleted license plate bracket, and new fog lights with new grills as well. In addition, new wipers and front bumper splitter, brand new factory OEM windshield with added ceramic tint, including brand new A-pillar rubber molding.
Factory 19” alloy rims have been power-coated with titanium grey.
The center cap and lug nuts were also replaced with a new black center cap and black lug nuts.
The new TPMS sensor and valve stem were also replaced.
This RS4 features Pirelli P-Zero tires that measure 275/30 R19 tires all around and show 2021 date codes. The rear calipers were fitted with plates indicating the RS logo.
The brake calipers were stripped down to the metal and were power coated during the ownership.
New piston seals and bolts were also installed.
New OEM brake pads, brake discs, caliper hoses, and brand-new brake disc dust shields were installed.
The system was also flushed and a four-wheel alignment was performed.
Recaro seats are upholstered in black leather and feature white piping and embossed RS4 logos.
Carbon fiber trim lines the dashboard and door panels.
Amenities include heated seats and dual-zero climate control.
The shift knob, hand brake grip, armrest, and window switches were also replaced.
The seller also had new RS4-branded floor mats installed and had the illuminated door lights switched to Audi logo LEDs in addition to installing LED lights throughout the interior.
A European-specification RS4 steering wheel has been installed and equipped with a new airbag and harness.
Instrumentation includes a 200-mph speedometer and a tachometer that reads 8k-rpm redline.
The factory Audi Navigation Plus system has been replaced with a European Audi Navigation Plus system, which includes a 2020/21 Dynamic Navigation System updated with North American maps.
The owner has equipped a Bluetooth Multi-Media interface which is all connected to a surround Bose sound system.
The 4.2-liter DOHC V8 is paired with a six-speed manual transmission and Quattro all-wheel drive. The engine was rated from the factory for 420 horsepower and 317 lb-ft of torque when new. Service performed in early 2022 included decarbonizing the intake valves, as well as installing the following new parts:
Both high-pressure fuel pumps and pressure sensors
All eight fuel injectors and seals
Intake sensors and air valve solenoids
PCV valve
Spark plugs and ignition coils
Air and fuel filter
Valve covers including gaskets
Oil cooler and oil filter housing
Front main seal gaskets
Serpentine belt
Coolant tank with R8 cap
Oil reservoir with R8 oil cap
Front and rear carbon fiber engine covers
Hood strut and insulation pad
Coolant expansion tank
Renewed brake, coolant, and power steering fluids
The suspension was fitted with new sway bar links, new upper and lower control arm bushings, and lower wishbone bushings.
All three engine mounts and transmission mount were replaced as well as all four corner wheel liners being replaced.
This is the real deal.